3D Printing Cost Calculator
Fill in the fields and press Calculate to see the result.
About the 3D Printing Cost Calculator
Work out what a 3D print costs: filament from its weight or length, the printer’s electricity, a margin for failed prints and other costs.
Pick the material and diameter to convert between grams and meters of filament. The calculator works in any currency.
How it is calculated
Cost = grams × spool price ÷ spool weight + kWh × price per kWh, plus the failure margin
Slicers such as Cura, PrusaSlicer or Bambu Studio show how much filament a print needs, in grams and meters. The calculator divides the spool price by its weight to get the price per gram and multiplies it by the grams used. If you only know the length, it turns meters into grams from the density of the material and the filament diameter.
Electricity is the printer’s average power times the print time: a desktop printer typically draws 100 to 200 W on average once the bed is hot. The failure margin adds a percentage for failed and test prints, and other costs can cover wear, post-processing or your time.
Example
A 120 g PLA print from a 1 kg spool that cost 20 uses 2.40 of filament, about 40 meters of 1.75 mm filament. Six hours at 150 W is 0.90 kWh, or 0.18 at 0.20 per kWh. With a 10% failure margin the print costs 2.84.
Frequently asked questions
How many meters are on a 1 kg spool?
About 335 m of 1.75 mm PLA, 327 m of PETG and 400 m of ABS. With 2.85 mm filament there are about 2.65 times fewer meters: some 126 m of PLA.
How much electricity does a 3D printer use?
Typically 0.1 to 0.2 kWh per hour of printing for a desktop printer, more with a large heated bed or a heated enclosure. Even a 10-hour print usually costs less in electricity than in filament.