Meter/square Second to Milligal converter

1 meter/square second = 100,000 milligals 1 milligal = 1 × 10⁻⁵ meters/square second

1 meter/square second = 100,000 milligals

= 0.1019716 g-unit (G) · 2.236936 mph/s · 100 cm/s²

How to convert Meter/square second to Milligal

Multiply the value in meters/square second by 100,000 to get the result in milligals.

Example: 5 m/s² × 100,000 = 500,000 mGal

Meter/square second to Milligal conversion table

Meter/square second → Milligal
Meter/square secondMilligal
0.1 m/s²10,000 mGal
0.5 m/s²50,000 mGal
1 m/s²100,000 mGal
2 m/s²200,000 mGal
3 m/s²300,000 mGal
4 m/s²400,000 mGal
5 m/s²500,000 mGal
10 m/s²1,000,000 mGal
15 m/s²1,500,000 mGal
20 m/s²2,000,000 mGal
25 m/s²2,500,000 mGal
50 m/s²5,000,000 mGal
100 m/s²10,000,000 mGal
500 m/s²50,000,000 mGal
1,000 m/s²100,000,000 mGal
Milligal → Meter/square second
MilligalMeter/square second
0.1 mGal1 × 10⁻⁶ m/s²
0.5 mGal5 × 10⁻⁶ m/s²
1 mGal1 × 10⁻⁵ m/s²
2 mGal2 × 10⁻⁵ m/s²
3 mGal3 × 10⁻⁵ m/s²
4 mGal4 × 10⁻⁵ m/s²
5 mGal5 × 10⁻⁵ m/s²
10 mGal0.0001 m/s²
15 mGal0.00015 m/s²
20 mGal0.0002 m/s²
25 mGal0.00025 m/s²
50 mGal0.0005 m/s²
100 mGal0.001 m/s²
500 mGal0.005 m/s²
1,000 mGal0.01 m/s²

Frequently asked questions

How much is 1 meter/square second in milligals?

1 meter/square second = 100,000 milligals.

How much is 1 milligal in meters/square second?

1 milligal = 1 × 10⁻⁵ meters/square second.

How do I convert meters/square second to milligals?

Multiply the value in meters/square second by 100,000 to get the result in milligals. Example: 5 m/s² × 100,000 = 500,000 mGal.

About Meter/square second

Meter/square second (m/s²) is the SI unit of acceleration: the change of speed in meters per second for each second. Free fall near the Earth is about 9.81 m/s², a family car reaching 100 km/h in 10 seconds averages about 2.8 m/s², and hard braking on a dry road gives about 8 to 10 m/s².

1 meter/square second = 0.1019716 g-units (G)
1 g-unit (G) = 9.80665 meters/square second

About Milligal

Milligal (mGal) is a thousandth of a gal, 10⁻⁵ m/s², the working unit of gravity surveys. The Earth’s gravity is about 5,000 mGal stronger at the poles than at the equator, while ore bodies, salt domes and caves produce anomalies of only a few to tens of milligals, which is how geophysicists find them.

1 milligal = 1 × 10⁻⁵ meters/square second (m/s²)
1 milligal = 1.019716 × 10⁻⁶ g-units (G)
1 meter/square second = 100,000 milligals

Convert meter/square second to other units

centigal centimeter/square second decigal decimeter/square second dekameter/square second foot/square second g-unit (G) gal galileo grav hectometer/square second inch/square second kilometer/hour second kilometer/square second mile/hour minute mile/hour second mile/square second millimeter/square second