Watts to Amps Calculator

Fill in the fields and press Calculate to see the result.

About the Watts to Amps Calculator

Convert watts to amps, amps to watts or VA to amps for single-phase and three-phase AC or DC, with the voltage and the power factor.

For three-phase circuits enter the line-to-line voltage, such as 208, 400 or 480 V.

How it is calculated

DC: I = P ÷ V · Single-phase: I = P ÷ (V × PF) · Three-phase: I = P ÷ (√3 × V × PF)

In a DC circuit the current is simply the power divided by the voltage. In AC, the power that does work (watts) is the voltage times the current times the power factor, which is 1 for heaters and incandescent lamps and about 0.8 to 0.9 for motors, compressors and many power supplies. Volt-amperes (VA) are the voltage times the current without the power factor: the figure generators and UPS units are rated in.

A three-phase supply carries the same power on three conductors, so the current in each is the power divided by √3 (1.732) times the line-to-line voltage and the power factor. Cables, breakers and fuses must be sized by an electrician to the rules in your country, not from this result alone.

Example

A 1,500 W heater on 120 V single-phase draws 12.5 A. A 20 kW three-phase motor on 480 V with a power factor of 0.9 draws 26.73 A per phase, 22.22 kVA.

Frequently asked questions

How do I convert watts to amps?

Divide the watts by the volts, and by the power factor on AC: 2,000 W on 120 V is 16.67 A with a power factor of 1. On three-phase, also divide by 1.732.

What is the difference between watts and VA?

Watts are the real power; VA is voltage times current. They are equal when the power factor is 1; a load of 1,000 W with a power factor of 0.8 takes 1,250 VA.

More Electrical Calculators