Irrigation Calculator

Pump or well flow (optional)

Fill in the fields and press Calculate to see the result.

About the Irrigation Calculator

Work out the water to pump to apply a given depth over a field or garden, with the losses of drip, sprinkler or furrow irrigation, and how long it takes.

The area can be in acres, hectares or any regional land unit, and the flow in gallons per minute, liters per second or m³ per hour.

How it is calculated

Water = area × depth ÷ efficiency · Time = water ÷ flow

Irrigation and rain are measured as a depth of water: 1 inch over an acre is 27,154 US gallons (one acre-inch), and 1 mm over a square meter is 1 liter, or 10 m³ per hectare. The calculator multiplies the area by the depth you want to apply to get the water the crop needs.

No system delivers all of it to the roots: some evaporates, runs off or drains below them. Typical efficiencies are 90% for drip, 85% for center pivots, 75% for sprinklers and 60% for furrow or flood irrigation, so the water to pump is the net amount divided by the efficiency. With the flow of the pump or well, the calculator gives the irrigation time.

Example

To apply 1 inch to an acre with sprinklers (75%), you pump 36,206 US gallons (137 m³), 1.33 acre-inches. A 300 gpm pump does it in 2 h 1 min.

Frequently asked questions

How many gallons is an inch of water on an acre?

About 27,154 US gallons, one acre-inch. With sprinklers at 75% efficiency you need to pump about 36,200 gallons to put a full inch into the soil.

How much water does 1 mm of irrigation use?

1 liter per square meter, or 10 m³ (10,000 liters) per hectare, before the losses of the irrigation method.

More Land and Farming Calculators