Sprayer Calibration Calculator
Fill in the fields and press Calculate to see the result.
About the Sprayer Calibration Calculator
Calibrate a boom or backpack sprayer: the gallons per acre or liters per hectare from nozzle flow, speed and spacing, and the product and area per tank.
Add the tank size, the product rate from the label and the field size to get the tank fills and the total product.
How it is calculated
GPA = 5,940 × GPM ÷ (mph × nozzle spacing in in) · L/ha = 600 × L/min ÷ (km/h × spacing in m)
The application rate is the liquid each nozzle sprays per minute spread over the strip it covers while moving: flow divided by speed times nozzle spacing. Measure the flow by catching one nozzle for a minute, time the sprayer over a measured distance to get the real speed, and use the nozzle spacing on a boom or the swath width of a backpack or boomless sprayer.
The area a tank covers is the tank volume divided by the rate; the product per tank is that area times the label rate. Always follow the product label for rates, mixing order and protective equipment, and recheck the calibration when you change nozzles, pressure or speed.
Example
Nozzles spraying 0.3 GPM at 5 mph and 20 inches apart apply 17.82 gallons per acre. A 300 gallon tank covers 16.84 acres, so at 32 fl oz of product per acre it takes 538.72 fl oz per tank.
Frequently asked questions
How do I calculate gallons per acre?
Multiply the flow per nozzle in GPM by 5,940 and divide by the speed in mph times the nozzle spacing in inches. 0.3 × 5,940 ÷ (5 × 20) = 17.8 GPA.
How much product goes in the tank?
Divide the tank volume by the application rate to get the acres per tank, then multiply by the label rate per acre. 300 gal ÷ 17.82 GPA = 16.84 acres; × 32 fl oz = 539 fl oz.