Brick and Block Calculator

Wall

Brick or block

Mortar (optional)

Fill in the fields and press Calculate to see the result.

About the Brick and Block Calculator

Calculate how many bricks or blocks you need for a wall, and the mortar with its cement and sand, from the wall size, the brick size and the joint.

It works for any brick or block – clay bricks, concrete blocks, breeze blocks or stone – in US units or metric. Enter the face of the brick as it is laid: its length and its height.

How it is calculated

Bricks = wall area ÷ ((brick length + joint) × (brick height + joint)) × (1 + waste)

Each brick covers its face plus one mortar joint along the top and one at the end, so the joint is added to its length and height. The wall area, minus doors and windows, divided by that gives the number of bricks; the waste allowance covers broken and cut bricks.

The mortar is the volume of the wall minus the volume of the bricks, so it needs the wall thickness (the depth of the brick in a single-leaf wall). Dry mortar takes up about 1.33 times its laid volume; that is split by the cement : sand ratio, with cement at 1,440 kg per m³. Cored bricks and hollow blocks take more mortar than the joints alone, so allow extra for them.

Example

A 16 × 8 ft garden wall (128 ft²) with a 15 ft² opening leaves 113 ft². US modular bricks (7 5/8 × 2 1/4 in, 3 5/8 in deep) with 3/8 in joints take 6.86 per ft², so 814 bricks with 5% waste, and about 6.6 ft³ of mortar.

In metric: a 5 × 2.5 m wall with a 1.5 m² window leaves 11 m². UK bricks (215 × 65 mm, 102.5 mm deep) with 10 mm joints take 59 per m², so 685 bricks with 5% waste, and about 0.2 m³ of mortar: 78 kg of cement (2 bags of 50 kg) and 0.22 m³ of sand in a 1:4 mix.

Frequently asked questions

How many bricks are there in a square foot or square meter?

With 3/8 in joints, 6.86 US modular bricks per ft² and 1.125 standard 8 × 16 in concrete blocks. With 10 mm joints, about 60 UK bricks (215 × 65 mm) or 10 concrete blocks of 440 × 215 mm per m².

What mortar mix should I use for bricks?

A 1:4 cement : sand mortar is a common all-purpose mix. Stronger 1:3 mortar is used below ground and for copings; weaker 1:5 or 1:6 mixes, usually with lime or plasticizer, suit ordinary walls above ground and soft bricks. Bagged mortar (Type N, Type S) comes with its own mixing instructions.

How much should I add for waste?

5% is usual for bricks and blocks on a straight wall; use 10% for walls with many corners, openings or cut bricks, or for fragile bricks. Order from the same batch so the color matches.

More Construction Calculators

Embed this calculator

Add this calculator to your website for free: copy the code below and paste it into your page. It stays up to date automatically.

All calculators you can embed