Metal Weight Calculator

Fill in the fields and press Calculate to see the result.

About the Metal Weight Calculator

Calculate the weight of steel, stainless steel, aluminum, copper or brass plates, round, square and hex bars, tubes and angles from their size and length.

Works in inches and feet or in millimeters and meters, with the weight per foot or meter and an optional price per pound or kilo.

How it is calculated

Weight = cross-section area × length × density

The weight of a bar, tube or plate is its volume times the density of the metal. The calculator works out the cross-section from the measurements: thickness times width for a plate, π × d² ÷ 4 for a round bar, π × (outside diameter − wall) × wall for a tube and thickness × (leg 1 + leg 2 − thickness) for an angle. Times the length, that is the volume.

The densities are typical values: 7,850 kg/m³ (0.284 lb/in³) for carbon steel, 7,930 for 304 stainless, 2,700 for aluminum and 8,500 for brass. Real weights differ by a few percent with the alloy, rolling tolerances and the rounded corners of tubes and angles.

Example

A 1/4 in steel plate of 4 × 8 ft weighs 326.7 lb, 40.8 lb per foot of its 48-inch width. A 1/2 in round steel bar weighs 0.668 lb per foot.

Frequently asked questions

How much does a steel plate weigh per square foot?

About 40.8 lb per square foot for each inch of thickness: 10.2 lb for 1/4 in, 20.4 lb for 1/2 in.

How do I calculate the weight of a steel tube?

Multiply (outside diameter − wall) × wall × 10.69 for pounds per foot, with the measurements in inches. A 2 in steel tube with a 0.125 in wall weighs (2 − 0.125) × 0.125 × 10.69 = 2.51 lb/ft.

More Construction Calculators

Embed this calculator

Add this calculator to your website for free: copy the code below and paste it into your page. It stays up to date automatically.

All calculators you can embed