Centrifuge RPM to g Calculator (RCF)

Fill in the fields and press Calculate to see the result.

About the Centrifuge RPM to g Calculator (RCF)

Convert centrifuge speed in rpm to relative centrifugal force (RCF, × g) or the other way round, from the rotor radius.

Protocols give the force in × g because the same rpm produces a different force in a different rotor. Measure the radius from the center of the rotor to the bottom of the tube.

How it is calculated

RCF = 1.118 × 10⁻⁵ × r (cm) × rpm² · rpm = √(RCF ÷ (1.118 × 10⁻⁵ × r))

The relative centrifugal force is the acceleration in the tube compared with gravity. It grows with the radius and with the square of the speed: doubling the rpm gives four times the force, while a rotor twice as large gives twice the force at the same rpm. The constant 1.118 × 10⁻⁵ combines the conversion of rpm to radians per second and of the radius in centimeters, divided by standard gravity.

Use the maximum radius, to the bottom of the tube, which is the figure rotor manufacturers list as r max; the force at the top of the liquid is lower. Never exceed the maximum speed of the rotor or the tubes.

Example

A microcentrifuge spinning at 13,000 rpm with an 8.5 cm radius gives 16,060 × g. To spin cells at 500 × g in a rotor with a 15 cm radius, set 1,727 rpm.

Frequently asked questions

How do I convert rpm to g?

Multiply 1.118 × 10⁻⁵ by the rotor radius in centimeters and by the rpm squared. At 3,000 rpm and 10 cm: 1.118 × 10⁻⁵ × 10 × 3,000² = 1,006 × g.

Why do protocols give × g instead of rpm?

Because the force depends on the rotor radius: 10,000 rpm is about 6,700 × g in a 6 cm rotor and 16,800 × g in a 15 cm rotor. The force in × g gives the same result in any centrifuge.

More Lab Calculators